Bent track from a backed-into bumper or a worn roller riding rough can pull a door clean off its rails. We fix the immediate problem and the root cause.
Fixing the symptom without finding the cause usually means the same problem returns within weeks.
A track that's even slightly off vertical puts uneven stress on rollers and hardware every single cycle.
Track that's visibly bent or dented from impact gets replaced rather than hammered back into shape.
Full impact assessment covers track, brackets, and any panel damage from the same event.
Whatever brought you here, one of these service lines is the fix, and one call gets a technician moving.
We realign horizontal and vertical track sections together, since a shift in one usually affects the other.
Visibly bent or dented track sections get swapped for new standard sections rather than bent back into shape.
A roller jumping the track repeatedly usually means the rollers themselves need replacing along with the fix.
Collision damage often affects more than the visible dent. We check the full track and frame mounting system.
Loose or cracked wall brackets let the track shift under normal operation. We reinforce or replace mounting hardware as part of the repair.
Let us know if the door is jammed off-track or just running rough, and we'll prioritize accordingly.
Most off-track calls don't require a parts run thanks to a well-stocked van.
A full inspection prevents a quick patch that fails again within weeks.
Track realigned or replaced, verified plumb, and tested through a full cycle before we leave.
“Backed the truck into the door and bent the track pretty badly. Replaced the section and it runs like new.”
“Track was off plumb by more than it looked. Fixed properly instead of a quick patch.”
“Appreciated that they checked the wall brackets too, not just the visible bent section.”
Off-track issues typically trace back to hardware wear or a physical impact rather than opener problems.
We don't recommend it. Forcing a door back on the track can cause further damage or personal injury.
A section that's been bent once tends to weaken with repeated stress, so replacement is often the better call.
Cost depends on whether it's a simple realignment or a full track section replacement, confirmed as a flat price on-site.
No, we recommend not operating the door until it's repaired, since further damage or injury risk increases with continued use.
Most off-track repairs are completed same-day, typically within one to two hours on-site.
Call now for a real appointment window, not a callback promise.
☎ Call +1-831-293-1591Our San Leandro coverage spans the full city and the zips around it, so a same-day window is realistic almost anywhere nearby.
Embedded Map Placeholder for San Leandro, CA